Security Camera, NexGadget 720P HD WiFi IP Camera Surveillance System Video Recording P2P Pan Tilt Remote Motion Detect Alert With Two-Way Audio and Infrared Night Vision [Updated Version]

3 Working Modes
Continuously recording: 24/7 live video streaming
Selected-time recording: users can settle their customised recording time based on their needs.
Detected recording: motion and sound detection function, it starts to record when movement detected.
How To Setup
Download and install the Yoosee App (Yoosee Only)
Register the User ID by Email Account ( Email Account Only)
Plug (IP Camera) In The Power Cable: (Start To Configuration) Sound will be sent by the IP Camera
Add The Camera Through The WIFI or Wired Network: place IP Camera close to your router for first connection is Recommended, good signal will speed up the connection.
Cannot Connect To WIFI
Please make sure the WIFI Password is correct
Please make sure the router signal is stable (place IP Camera close to your router for first connection is Recommended)
The Camera will not work on a 5Ghz wireless standard at this time. If you have a dual-band router, be sure to segregate your wireless channels and connect the Camera to the 2.4ghz channel.
Reset
Check The IP Camera: please make sure the IP Camera send (Start To Configuration) Sound after the plug. If not, we need to reset the Camera.
Why Reset: reset is used to boost the IP Camera system, which become more efficient to accept the unknown router and connect it.
Reset will erase all user settings including WIFI information, access password, alarm information, arming zones information.
The Steps: find the reset hole at the bottom of the device, and then use needle to insert it, press it more than three seconds after hearing "di" sound, when hearing 'Reset to be defaulted setting' sound, reset successfully.
After the reset, user can start to connect it by WIFI.
Importance
NexGadget Camera can record to an internal Micro SD card (up to 64g), not included in the packaging.