This Anti-Bark Collar stops barking with progressively increasing sound and shock which is controlled by a microprocessor
distinguishing your dog's bark from other environmental noises and automatically delivers sound and shock after each bark,
most of the pets will quickly understand the new sensation is telling her to be quiet.
It can be adjusted to control the sensitivity of the voice, according to the size of dogs barking.
How to it works:
At the first bark, the Collar applies a short warning tone.If a second bark occurs within 30 seconds, a more intense tone is sounded.
From the third bark, a more intense tone is sounded along with a short, mild shock. This pattern is repeated through 7 correction levels.
If your dog continues to bark, the more intense sound and shock are applies until your dog stops for 30 seconds,
and then it will automatically resets to the first "tone only" level of correction.
If the continuous stimulus reaches the 7 levels, then the Collar will stop working for 1 minutes to protect the dog.
There is a test light which you can contact the electrodes (on the collar) and the wires (in the tester),
then blow air into the sensing hole (between the tow electrodes),the light will start to light up on your 3rd time to blow,
and will be brighter and brighter on your following times to blow.
1 x No bark receiver
1 x Adjustable Nylon Collar
1 x LED Test Light
2 x Long shock electrodes
2 x Short shock electrodes
1 x English Manual
when first using, you should check under the dog's neck to make sure there's no wound. It's also a good idea to brush their coat and check their skin daily.
Please stay with your dog and guide it to adjust to the usage of the collar.Let it understand the collar does no harm, it only work when it barks.