Video Transmission Systems - Page 51

Manufacturer: Provenice Brand: Campark Model: Provenice

Specification: Type: RC Quadcopter Brand: SKY Hawkeye Model: HM1315s Suit Version Type: RTF Remote Frequency: 2.4GHz Flight Movement: Hover, Roll, 3D Advanced Function: Figure Pass Color: Black & Red Battery Type: Li-po Battery Battery: 3.7v 700mAh Power for RC: 4 * AA Battery (NOT Included) Charging Mode: USB Charging Material: PC Weight: 4.23oz / 120g Dimensions: (7.87 x 7.87 x 3.94)" / (20 x 20 x 10)cm (L x W x H) Camera Frequency: 5.8G Camera Pixels: 30W Action Time: 5-8 minutes Charging Time: About 45 minutes Suitable for: 14+Ages

Manufacturer: Gino Brand: Gino Model: 28

CCTV Video Balun Amplifier is a video distribution amplifier, and can amplify video signal in a balanced manner, CCTV Camera Video Balun is used in remote video signal transmission system to raise and balance signal loss and freqency disortion, and compatible with color video.Installation:Connect 12V DC to it;Connect input video to "Video in" BNC;Connect output video to "Video out" BNC;After the above operations are completed, you can adjust gain up to output video voltage is 1Vp-p, then adjust HFGAI.;You can repeat these operations up to the satisfied result.Specification:,Bandwidth: (-3db): 10Hz to 7.5MHz,Gain: adjustable and max up to 6dB,Max output video voltage: 2.5 Vp-p,Size: 9.4 x 6.2 x 2.3cmPackage content:1 x BNC Coaxial Video Balun, 1 x English Manual.

Manufacturer: Itelite Brand: Itelite DBS

This Itelite Antenna kit is designed specifically for the all new Yuneec Typhoon H Hexa Drone Kit. It offers up to 3x the flight distance, requires no soldering or any drone modification. Also works with Yuneec H920

Manufacturer: Napok Brand: Napok Model: NC-BM01 Color: Baby Monitor

The 3.5 inch color video LCD handheld unit features two-way audio communication, so parents can soothe baby from anywhere with your voice.It also include the automatic Lullabies to calm baby to sleep. The included camera features night vision and temperature detection, so parents clearly see baby in a darkened room and control the sleeping environment. Keep baby in view all the time. Features: 1.2.4G wireless transmission within 700 ft. (The monitor and camera need connect with power cable to get power,but no wiring between the them to get signal transmission) 2.3.5 inch HD display monitor with clear insight and it's portable to keep baby in view anywhere. 3.Night vision to clearly see baby in a darkened room. 4.Two-way communication to get voice from baby and calm baby with your voice too. 5.The music lullabies to calm baby to sleep with automatic setup. 6.Temperature detection to keep the best environment for baby rest. 7.Rechargeable battery for the devices to support a long time. Packing Included: -1X Receiver -1X Camera -2X Adapter -1X Manual Attention:If lost connection between monitor and camera,please pair them as the instruction in the manual.One Year Limited Quality Warranty, any query, please contact seller,would be solve with 24 hours

Manufacturer: fenvi Brand: Fenvi

This is a NEW Super small 5.8Ghz 1000mW 1W 8CH transmitter. Perfect for FPV model applications, very small and light to mount anywhere and a very long range. It includes all cables to connect to power sources and video sources, just use your own camera of choice. Modulate: Wideband FM Modulate Video format: NTSC/PAL Output impedance: 50 Ohm Output power: 30 dBm Channel frequency: CH1: 5705 MHz CH2: 5685 MHz CH3: 5665 MHz CH4: 5645 MHz CH5: 5885 MHz CH6: 5905 MHz CH7: 5925 MHz CH8: 5945 MHz Operating voltage: 7-15V Supply current: 750 mA VOUT: 7-15V Operating temperature: -10 - +85 Video band width: 0-8.0 MHz Audio carrier frequency: 6.5MHz Video input level: 1.0 Vp-p Video input impedance: 75 Ohm Audio input level: 0.5-2.0 Vp-p Audio input impedance: 10k Ohm Antenna connector: SMA connecto Package: 1 X Transmitter (with cable) 1 X User Guide

Manufacturer: Flysight Brand: Flysight

Manufacturer: podofo Brand: podofo

Specifications: Wireless Receiver: Frequency:ISM 2,400~2,483 MHz Modulation Mode:FM Effect Range:100m (Without Block) Receiving Sensitivity:-85dBm Intermediate Frequency:480MHz TV System:PAL/NTSC Definition:380TVL Consumption Current:50mW 200mW Output Power:DC9-12V Output Frequency:2414/2432/2450/2468 MHz Dimension (DXWXH):80x115x21(mm) Wired to wireless Converter: Frequency:ISM 2,400~2,483 MHz Transmission Power:2mW Unobstructed Effective Range:100m Modulation Mode:FM Operating Temperature:-10 ~ +50(°C) / +14~ +122(°F) Storage Temperature:-20 ~ +60(°C) / -4 ~ +140(°F) Operating Humidity：85%RH Power supply:DC12V Brand width:18MHz Dimensions(W x D x H):35x33x39(mm) Operation: 1.Connect the receiver to the monitor with AV cable 2.Plug the power adapter into the power jack of the receiver 3.Connect the converter to CCTV camera through the BNC socket. 4.Connect the converter to the CCTV camera with the power cable. 5.Power on the converter through the adapter of the CCTV camera. 6. Adjust the camera to the best position. Package Includes: 1 x Wireless Receiver 1 x Antenna 1 x AV Cable 1 x Wired To Wireless Converter 1x Power Adapter For Receiver(EU/AU/UK/US, send according to your country) 1 x Power Cable 1 x User Manual

Manufacturer: Shenzhen Sheng Da Rong Hua Industrial Co., Ltd Brand: New Landing

1. Introduction This system can be used in apartments,villas,hotels and offices etc. For better taking advantage of the prior functions please carefully read our instruction for correct installation and operation. 2. Features (1) 2.4GHz launch frequency, Approx 300meters barrier free remote control distance; (2) With micro-processing technology, auto-remote control, excellent performance and high reliability; (3) 7" TFT color display; (4) 0.3Mega pixel camera; (5) Clear night-viewing; 24hours monitoring, calling, speaking and unlocking remote controlling etc; (6) One monitor for up to four cameras; (7) Time shown on the indoor monitor; (8) Rechargeable lithium battery through mini use charger; (9) Monitor can take/ save/ view more than 100photos automatically; (10) Build-in chord melodies;

Manufacturer: Linemak Brand: Linemak Model: LS-UTP16PV

16CH Passive Video receiver and power server Hub, Transmit video +24V AC power 100M+audio+PTZ data signals, Input power supply is 110V/220V AC, output power supply is 36V AC, Each channel output power supply is 24V AC/12V DC, 600amp per Camera

Manufacturer: ANYSUN Brand: Anysun

Description: Wifi Visual intercom doorbell is a doorbell work with wifi . It connect with home wifi or wired LAN achieve two-way intercom between doorbell and cell phone .When visitors press the doorbell ,doorbell sounds and meanwhile camera will start to work sending real-time picture and call to smart phone . User receive the call and see the video to check who is outside ,can intercom with visitors and remotely unlock door etc . Wifi Visual intercom doorbell have alarm and remote control functions , make your home security has more powerful barrier Operating steps 1.According to the installation diagram and the wiring diagram to install good products, good locks and turning on the power supply connection. 2.Wait for about 1 minute, when the product send out "system startup success, welcome to use" is for product starts successfully, can be normal use. 3.Download and install the phone software: android mobile phones can scan color box on the side of the android qr code or application in the android market search "WIFI BELL" download installation;Apple mobile phone system can scan color box on the side of the IOS qr code or in the APP STORE search download and install. 4.Open the software into the interface must be registered account first, after the success of the registration with the registered account password to log in. Speclfications: Camera 1/4"/F2.4/110° Distinguishanility 420line Illumination 2LUX Light source 6pcs lnfeared light Power Standbay;DC 12V 1A Powerdissipation Stanbay;working;3.8W Dimensions 120*96*34mm Package Content: 1 X Outdoor camera 2 X Screws 3 X User manual 4 X Power Supply 5 X The interface line