|
|
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $10.00 2% OFF
Manufacturer: SnapSafe
Brand: SnapSafe
Manufacturer: SnapSafe
Brand: SnapSafe
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $9.99 2% OFF
Manufacturer: Gun Safe Signs
Manufacturer: Gun Safe Signs
Place this magnet on your safe to let unauthorized visitors know it would be a very bad idea to steal or remove your safe. This 4 x 6 inch magnet is made of a high quality vinyl material that will last for years. Warning is in both English and Spanish. English warning: ATTENTION: This safe is electronically monitored by Gun Safe Tracker. If this safe is opened the owner will be notified immediately. Additionally, if this safe is removed from this property gun safe tracker will alert law enforcement. Gun safe tracker can track this safe. Anytime. Anywhere. Spanish warning: ATENCIÓN: Esta caja fuerte se controla electrónicamente por Gun Safe Tracker. Si esta caja fuerte se abre, el propietario será notificado inmediatamente. Además, si esta caja fuerte se saca de esta propiedad Gun Safe Tracker alertará a las autoridades. Gun Safe Tracker puede rastrear a esta caja fuerte. En cualquier momento. En cualquier lugar.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $9.95 2% OFF
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
|
The Buck Head Whitetail Deer Big Game Decal will look great on your truck, car, boat, trailer or any of your fishing gear that has a clean, smooth finish. Available in these sizes: Small: 3.5 x 7 Medium: 5.5 x 11 Not finding the size you need? Contact us, we can print a custom size for you! This decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years. Decal Installation Instructions: 1. Clean the surface your decal will be applied to. 2. Wash the area with soapy water, and rinse thoroughly with warm water. 3. Then dry the surface with a clean, lint-free towel or cloth. You are now ready to apply the sticker/decal. 4. Apply the decal using firm pressure with your hand, starting from the center and moving to the edges. The decals have a pressure sensitive adhesive. This means the harder you press the decal down by hand, the better the adhesive will stick to the application surface. 5. Spend a little extra time pressing down the decal edges. NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick. Surface temperatures must be between 50° and 85° Fahrenheit before attempting to install the decal. Applications beyond this temperature range will reduce the adhesives' ability to perform. Do not use an ice scraper on the decal - it may lift or break pieces off. Do not spray high pressure car wash nozzle at the edges of the decal. It may lift. Do not apply wax over decal. Hand washing with water is safe.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $9.95 2% OFF
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
|
The Buck Head Whitetail Deer Big Game Decal will look great on your truck, car, boat, trailer or any of your fishing gear that has a clean, smooth finish. Available in these sizes: Small: 3.5 x 7 Medium: 5.5 x 11 Not finding the size you need? Contact us, we can print a custom size for you! This decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years. Decal Installation Instructions: 1. Clean the surface your decal will be applied to. 2. Wash the area with soapy water, and rinse thoroughly with warm water. 3. Then dry the surface with a clean, lint-free towel or cloth. You are now ready to apply the sticker/decal. 4. Apply the decal using firm pressure with your hand, starting from the center and moving to the edges. The decals have a pressure sensitive adhesive. This means the harder you press the decal down by hand, the better the adhesive will stick to the application surface. 5. Spend a little extra time pressing down the decal edges. NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick. Surface temperatures must be between 50° and 85° Fahrenheit before attempting to install the decal. Applications beyond this temperature range will reduce the adhesives' ability to perform. Do not use an ice scraper on the decal - it may lift or break pieces off. Do not spray high pressure car wash nozzle at the edges of the decal. It may lift. Do not apply wax over decal. Hand washing with water is safe.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $9.95 2% OFF
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
|
The Pheasant Decal will look great on your truck, car, boat, trailer or any of your gear that has a clean, smooth finish. Available in these sizes: Small: 5 x 8 inches Medium: 8 x 12 inches Not finding the size you need? Contact us, we can print a custom size for you! This decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years. Decal Installation Instructions: 1. Clean the surface your decal will be applied to. 2. Wash the area with soapy water, and rinse thoroughly with warm water. 3. Then dry the surface with a clean, lint-free towel or cloth. You are now ready to apply the sticker/decal. 4. Apply the decal using firm pressure with your hand, starting from the center and moving to the edges. The decals have a pressure sensitive adhesive. This means the harder you press the decal down by hand, the better the adhesive will stick to the application surface. 5. Spend a little extra time pressing down the decal edges. NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick. Surface temperatures must be between 50° and 85° Fahrenheit before attempting to install the decal. Applications beyond this temperature range will reduce the adhesives' ability to perform. Do not use an ice scraper on the decal - it may lift or break pieces off. Do not spray high pressure car wash nozzle at the edges of the decal. It may lift. Do not apply wax over decal. Hand washing with water is safe.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $9.95 2% OFF
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
|
The Black Bear Decal will look great on your truck, car, boat, trailer or any of your gear that has a clean, smooth finish.
Available in these sizes:
Small: 5.5 x 4.75 inches
Medium: 12.75 x 8 inches
Not finding the size you need? Contact us, we can print a custom size for you!
This decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years.
Decal Installation Instructions:
1. Clean the surface your decal will be applied to.
2. Wash the area with soapy water, and rinse thoroughly with warm water.
3. Then dry the surface with a clean, lint-free towel or cloth. You are now ready to apply the sticker/decal.
4. Apply the decal using firm pressure with your hand, starting from the center and moving to the edges. The decals have a pressure sensitive adhesive. This means the harder you press the decal down by hand, the better the adhesive will stick to the application surface.
5. Spend a little extra time pressing down the decal edges.
NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick.
Surface temperatures must be between 50° and 85° Fahrenheit before attempting to install the decal. Applications beyond this temperature range will reduce the adhesives' ability to perform.
Do not use an ice scraper on the decal - it may lift or break pieces off.
Do not spray high pressure car wash nozzle at the edges of the decal. It may lift.
Do not apply wax over decal.
Hand washing with water is safe.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $9.95 2% OFF
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
|
The Black Bear Decal will look great on your truck, car, boat, trailer or any of your gear that has a clean, smooth finish.
Available in these sizes:
Small: 5.5 x 4.75 inches
Medium: 12.75 x 8 inches
Not finding the size you need? Contact us, we can print a custom size for you!
This decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years.
Decal Installation Instructions:
1. Clean the surface your decal will be applied to.
2. Wash the area with soapy water, and rinse thoroughly with warm water.
3. Then dry the surface with a clean, lint-free towel or cloth. You are now ready to apply the sticker/decal.
4. Apply the decal using firm pressure with your hand, starting from the center and moving to the edges. The decals have a pressure sensitive adhesive. This means the harder you press the decal down by hand, the better the adhesive will stick to the application surface.
5. Spend a little extra time pressing down the decal edges.
NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick.
Surface temperatures must be between 50° and 85° Fahrenheit before attempting to install the decal. Applications beyond this temperature range will reduce the adhesives' ability to perform.
Do not use an ice scraper on the decal - it may lift or break pieces off.
Do not spray high pressure car wash nozzle at the edges of the decal. It may lift.
Do not apply wax over decal.
Hand washing with water is safe.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $9.95 2% OFF
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
|
The Turkey Decal will look great on your truck, car, boat, trailer or any of your gear that has a clean, smooth finish.
Available in these sizes:
Small: 4.75 x 5 inches
Medium: 8.25 x 8.5 inches
Not finding the size you need? Contact us, we can print a custom size for you!
This decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years.
Decal Installation Instructions:
1. Clean the surface your decal will be applied to.
2. Wash the area with soapy water, and rinse thoroughly with warm water.
3. Then dry the surface with a clean, lint-free towel or cloth. You are now ready to apply the sticker/decal.
4. Apply the decal using firm pressure with your hand, starting from the center and moving to the edges. The decals have a pressure sensitive adhesive. This means the harder you press the decal down by hand, the better the adhesive will stick to the application surface.
5. Spend a little extra time pressing down the decal edges.
NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick.
Surface temperatures must be between 50° and 85° Fahrenheit before attempting to install the decal. Applications beyond this temperature range will reduce the adhesives' ability to perform.
Do not use an ice scraper on the decal - it may lift or break pieces off.
Do not spray high pressure car wash nozzle at the edges of the decal. It may lift.
Do not apply wax over decal.
Hand washing with water is safe.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $9.95 2% OFF
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
|
The Turkey Decal will look great on your truck, car, boat, trailer or any of your gear that has a clean, smooth finish.
Available in these sizes:
Small: 4.75 x 5 inches
Medium: 8.25 x 8.5 inches
Not finding the size you need? Contact us, we can print a custom size for you!
This decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years.
Decal Installation Instructions:
1. Clean the surface your decal will be applied to.
2. Wash the area with soapy water, and rinse thoroughly with warm water.
3. Then dry the surface with a clean, lint-free towel or cloth. You are now ready to apply the sticker/decal.
4. Apply the decal using firm pressure with your hand, starting from the center and moving to the edges. The decals have a pressure sensitive adhesive. This means the harder you press the decal down by hand, the better the adhesive will stick to the application surface.
5. Spend a little extra time pressing down the decal edges.
NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick.
Surface temperatures must be between 50° and 85° Fahrenheit before attempting to install the decal. Applications beyond this temperature range will reduce the adhesives' ability to perform.
Do not use an ice scraper on the decal - it may lift or break pieces off.
Do not spray high pressure car wash nozzle at the edges of the decal. It may lift.
Do not apply wax over decal.
Hand washing with water is safe.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $9.95 2% OFF
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
Manufacturer: Saber-Tooth Co
Brand: Saber-Tooth Co
|
The Ruffed Grouse Decal will look great on your truck, car, boat, trailer or any of your fishing gear that has a clean, smooth finish.
Available in these sizes:
Small: 5.5 x 4.5 inches
Medium: 9.5 x 8 inches
Not finding the size you need? Contact us, we can print a custom size for you!
This decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years.
Decal Installation Instructions:
1. Clean the surface your decal will be applied to.
2. Wash the area with soapy water, and rinse thoroughly with warm water.
3. Then dry the surface with a clean, lint-free towel or cloth. You are now ready to apply the sticker/decal.
4. Apply the decal using firm pressure with your hand, starting from the center and moving to the edges. The decals have a pressure sensitive adhesive. This means the harder you press the decal down by hand, the better the adhesive will stick to the application surface.
5. Spend a little extra time pressing down the decal edges.
NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick.
Surface temperatures must be between 50° and 85° Fahrenheit before attempting to install the decal. Applications beyond this temperature range will reduce the adhesives' ability to perform.
Do not use an ice scraper on the decal - it may lift or break pieces off.
Do not spray high pressure car wash nozzle at the edges of the decal. It may lift.
Do not apply wax over decal.
Hand washing with water is safe.
|
|