Keyed Padlocks - Page 11

Manufacturer: Master Lock Brand: Master Lock Model: 1115DLHIM

The Master Lock no. 1115Dlh laminated padlock features a 1-3/4 inch (45Mm) wide laminated steel body for maximum strength and reliability, and is surrounded by stainless steel and zinc outer components for weather resistance. The rust-oleum certified protection provides a lifetime guarantee against rusting on the lock body; and covered clock body, keyway, and shackle seals offer additional weather protection. The 5/16 inch (8Mm) diameter octagonal shackle is 2 inches (51Mm) long and made of tough-cut boron-carbide, 50 percent harder than hardened steel, offering maximum resistance to cutting and sawing. The 4-pin cylinder prevents picking and the dual locking ball bearings provide maximum resistance against prying and hammering. The lifetime guarantee provides peace of mind from a brand you can trust.

Manufacturer: Jensen (Home Improvement) Brand: American Lock Model: A701D

American Lock A701D 2-1/2" Steel Padlock Pad lock Virtually indestructible with hardened chrome plated solid steel bodies that resist cutting, sawing and corrosion Hardened boron alloy steel shackles that offer superior cut resistance Five and six pin brass cylinders and dual ball bearing locking mechanisms resist picking, pulling and prying Ideal for security gates, sheds, truck and van doors, industrial machinery and construction equipment Solid Steel 1-1/16" shackle height 5 pin APTC12 cylinder 7/16" diameter 15/16" horizontal clearance boron shackle 2-1/2" wide x 1-1/8" thick chrome plated solid steel body. This Product is manufactured in Mexico.

Manufacturer: Elloapic Brand: Elloapic Color: Black&silver

1. use the key to open the lock and pull out the lock pole, turn over 180 degree to insert into the lock hole, When hear the sound DU, the lock is coming into alarm situation, after 15 seconds, when the lock is vibrated again, it will give an alarm and keep alarm with serial movement or vibration. Each alarm will last 10 seconds. 2. When hear the sound Ge. Ge. Ge.constant voice, the battery will be worn out,you need to replace the battery.(please pull out the lock pole, spin out the two screws inside the lock body, take away the cover and replace the battery, pls pay attention to the anode and cathode.) 3.If in a minute without triggering, returned to the original function. After the vibration, you can sound the three- Warning tone. 4.Once stopped the alarm will re-set after 35 seconds.

Manufacturer: Rekink Brand: Rekink Color: Silver

Manufacturer: Jensen (Home Improvement) Brand: Master Lock Model: M176XDLHHC Color: Silver

The Master Lock Magnum No. M176XDLH Solid Body Padlock features a 2in (51mm) wide zinc die-cast body for strength and reliability. The 3/8in (10mm) diameter octagonal shackle is 2in (51mm) long and made of Tough-Cut boron-carbide, 50% harder than hardened steel, offering maximum resistance to cutting and sawing. The roller pin cylinder provides maximum pick and pry resistance. The dial cover offers superior weather protection, and reinforced body bumper protects against scratches. The lock includes set your own combination and the added convenience of a back up key. The Lifetime Guarantee provides peace of mind from a brand you can trust.

Manufacturer: Columbus McKinnon Corporation Brand: CM Model: M651AG

CM Alloy Shackles are designed with a 5:1 design factor and have a strength rating approximately 50% higher than a comparable-sized carbon shackle and about 25% stronger than super strong shackles. Anchor shackles can be side loaded or used for multiple connections.

Manufacturer: Master Lock Brand: Master Lock Model: 6835LFRED Color: Red

The Master Lock aluminum lockout/tagout padlock has a solid aluminum body that is corrosion-resistant; functions in temperatures from -35 to 350 degrees F; and has a keyed different 5-pin tumbler cylinder that provides a high security level (10,000 key codes). It has a UV-stabilized powder coated finish that resists corrosion and fading to retain high visibility. Its steel shackle is hardened with boron, has a 1-9/16" (39.7 mm) vertical shackle clearance for extra length, and is plated to resist corrosion. This padlock is part of a lockout/tagout (LOTO) safety procedure required at facilities where a device or energy source needs to be isolated during maintenance and repair. When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials. Specifications *Overall dimensions 2 x 1-9/16 x 13/16 inches (50.8 x 39.7 x 20.6 mm) (H x W x D) Weight 6.4 oz. Vertical shackle clearance 1-9/16" (39.7 mm) Horizontal shackle clearance 25/32" Shackle diameter 1/4" (6 mm) Shackle pull force withstood 3,100 lb. *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Vertical shackle clearance is the distance from the top of the lock body to the farthest point on the inside of the shackle. Horizontal shackle clearance measures the space between the shackle heel and shackle toe. Shackle pull force is tested to American Standard for Testing and Materials (ASTM) F883. Lockout/tagout (LOTO) safety procedures require that lockout devices meet Occupational Safety and Health Administration (OSHA) 1910.147(c)(5) standards for quality assurance. Safety padlocks, also called lockout padlocks, use colors or warning labels to help prevent machine operation or power activation during maintenance and repair. The security level of a safety padlock is measured more by the number of key co...

Manufacturer: Standard Plumbing Supply Brand: MasterLock Model: 1KALJ

1-3/4", Laminated Padlock, With 2-1/2" Long Shackle, Random Keyed Alike In Sixes, 5/16" Shackle Diameter, Uses Master Lock Key Blank K1BOX Or Alco Blank M1 TV #320-952, Boxed. The product is manufactured in China. Easy installation and easy handling.

Manufacturer: ABUS Brand: ABUS Model: 72AL/40 KA Green 1" Shackle Color: Green

Manufacturer: Standard Plumbing Supply Brand: Kaba Ilco Model: 7205UA1-03

Solid brass, mortise cylinder, uses key blank in3 (182-535), fit up to 1-1/4 the product is manufactured in china. Easy installation and easy handling.