Motion Detectors - Page 34

Manufacturer: LumaPro Brand: LumaPro

Motion Sensor, Max Load 500 W, Coverage 21000 Square-Ft, Viewing Angle 240 Deg, Voltage 120, Polycarbonate Sensor Housing Material, White Housing Finish, Passive Infrared Motion Sensor, UL Listed, Weatherproof, Includes (1) Motion Sensor and Look-Down Sensor

Manufacturer: GE SECURITY CADDX Brand: Interlogix Model: 60-460-319.5

ITI Rate-of-Rise and Fixed Temperature Heat Detectors offer an effective fire safety solution for environments with high likelihood of rapid fire development, or where optical smoke detectors cannot be used due to high dust conditions. These detectors are designed to monitor the room temperature and activate the alarm if the temperature gets too high or increases rapidly. With rate-of-rise heat detectors, a temperature increase at the sensor of 15 degree F (9 degree C) or more per minute activates the rate-of-rise feature. This closes the contacts in the sensor to transmit the alarm condition to the alarm control panel. When the rate-of-rise element alone has been activated, the sensor is self-restoring. With combination rate-of-rise and fixed temperature detectors, the fixed temperature element is activated when the temperature of the center disk rises to the sensor's rated temperature. This closes contacts in the sensor and transmits an alarm condition to the fire alarm control panel. The fixed temperature element is non-restorable and, when activated, the detector must be replaced. The need for replacement is indicated when the center disk has popped away from the detector. When selecting the location on the ceiling for the heat sensor, do not locate it in direct path of hot or cold airflow. Refer to the detector specifications for the recommended maximum spacing. Earlier detector response may be obtained by reducing the spacing between detectors.

Manufacturer: Hubbell Building Automation Brand: Hubbell Building Automation Model: LHUSS1B Color: Black

Manufacturer: Banner Engineering Brand: BANNER ENGINEERING

From our online store inventory, we are selling a New Banner EZ-SCREEN DESE4-525D (71402) Cable Specifications: Model #: DESE4-525D (71402) DESE4-525D Cable to Interface EZ-SCREEN 14 mm & 30 mm Receiver with MM-TA-12B Muting Module; 22 GA 8-pin Euro-style (M-12) female connector to 7-pin Mini-style male connector; double ended. 8 m. More Information: Link ST5-3-F

Manufacturer: C&M Vision Technologies Inc Brand: CMVision Model: CMVE-IR15

Cmvision IR15W Wide-angle 60-80 Degree 15pc Power LED Ir Array Illuminator Only sensitive with Sony or Sharp CCD Camera and lots of IP CMOS camera do not work with 850nm wavelength. Allow your camera to see in total darkness. This is a simple and effective way of discreetly illuminating an area (up to 100-200 feet in distance) where monochrome cameras are operating in the dark. Simply power the unit and position it in the direction of images being viewed and you will turn night into day for the camera. Since IR-Illumination can't be perceived or seen by the human eye it is perfect for covert applications or applications where you don't want visible lighting. This high quality IR-Illuminator has a weatherproof aluminum housing for both indoor or outdoor use.

Manufacturer: LumaPro Brand: LumaPro

Lamp Holder and Sensor Kit, Max Load 500 W, Coverage 21000 Square-Ft, Viewing Angle 240 Deg, Voltage 120, Metal Head with Polycarbonate Sensor Housing Material, Bronze Housing Finish, Lamp Type Quartz Halogen, Lamp Included, Passive Infrared Motion Sensor, UL Listed, Weatherproof, Includes (1) 500 W Lamp, (1) Lamp holder, Motion Sensor and Look-Down Sensor

Manufacturer: Sensor Switch Brand: Sensor Switch Model: CMR 10 Color: White

The CMR 10 Series incorporates Passive Infrared (PIR) technology into an attractive and economical line powered sensor to provide maximum viewing from the ceiling. Its circular coverage pattern is designed for walking motions; making it ideal for T-shaped intersections in corridors, or others areas where wall mounting a sensor is not practical.

Manufacturer: Leviton Brand: Leviton Model: MDS10-IDG Color: Grey

Lev-lok's innovative design streamlines installation and reduces costs. In just two easy steps, the Wiring device is securely attached to the Wiring module. Place the Wiring module over the device connection pins and twist clockwise to lock. Replacement is just as easy just turn counter-clockwise to unlock and remove. The module is keyed so that it cannot be installed incorrectly. This not only saves time during the initial installation, but makes maintenance applications quicker, safer and easier as well.

Manufacturer: Dakota Alert, Inc. Brand: Dakota Alert Model: PR-2500 Color: Black

The PR-2500 is pocket-sized receiver that is compatible with all of our 2500 series transmitters. It is capable of receiving and storing alert signals from up to 4 zones. Each zone can store up to 400 events with a date/time stamp. In addition, each zone can store up to 999 events without the date/time stamp. With the counter function you will know when the monitor was activated.

Manufacturer: LuckLED Brand: LuckLED Color: Black

Features Solar Powered Sensor Light, no utility energy costs Eco-friendly and enerngy saving wireless light with buit-in rechargeable battery Easy for installation and maintenance, no wiring required Beautiful modern design fit for any entryway or pathway Specification Solar Panel: 5.5V/80MA LED Quantity: 8 LEDs Rechargeable Battery included (3.7V 600mAh) Sensor Time:12S Switch: OFF/Auto Lighting Mode: OFF/DIM Light/High Light What's in the box 1 x LuckLED 8 LEDs Solar Sensor Light 1 x Mounting Kits (Include: 2 Screw/2 Sleeve/1 Activation Pin Key) 1 x Instruction Manual