Leviton OSW12-M0W Multi-Technology, 110 Degree, 1200 sq. ft. Coverage, Self-Adjusting, Wall Mount Occupancy Sensor, White
The OSW12-M Occupancy Sensor uses ultrasonic sensing for maximum motion sensitivity and infrared sensing for highest lights-off reliability. The sensor continually analyzes and adjusts to changing conditions. The OSW12-M Occupancy Sensor uses the latest microprocessor-based technology which permits the detector to continually adjust and optimize its performance. The detector requires a 24 volt OSPxx Series power pack. By combining ultrasonic and infrared technology, the OSW12-M Occupancy Sensor provides excellent small motion sensitivity (US) and error immunity (IR). The mounting base, provided with the sensor, allows quick and easy mounting in corners, on wall or on ceilings. With ultrasonic and infrared sensing, this top-of-the-line sensor provides the highest-degree of immunity to false tripping. Auto-adapting circuitry fine-tunes delay settings for "install and forget" simplicity. Multi-technology, 110-degree, 1200 sq. ft. coverage, self-adjusting, wall mount occupancy sensor, commercial grade - white.
Leviton OSP20-0D0 Occupancy Sensor Power Pack Ceiling Sensors 120/277 VAC
Containing both a 24VDC supply and a 20A line voltage relay for most models, the Leviton compact power pack provides low voltage power and line voltage control for Leviton Occupancy Sensors. Versions include Auto-ON and Manual-ON inputs for occupancy sensors, Hold-ON and Hold-OFF capabilities, and a local input for momentary or maintained dry contact switches. The internal relay can control up to 20A for a 120, 230, 277VAC or 347V ballast load and 20A for a 120VAC incandescent load. The OSP Power Pack Series is also used to supply power to the OSA Add-A-Relay model. The Power Pack conveniently mounts in a knockout hole of a standard junction box. The unit can be placed inside or outside the junction box with a simple twist-on nut. The internal relay can control up to 20 Amps at either 120, 230, or 277 VAC ballast load, 15 Amp for 347 VAC ballast load. Description Cat
RW3U600-W PASS & SEYMOUR WALL SENSOR SWITCH 120V 600W SINGLE POLE / 3 WAY
RW3U600W Features: -Sensor.-Occupancy-based control plus multi-way operation.-Adjustable time delay of 15 seconds to 30 minutes.-Light level sensing prevents automatic on of lights when adequate daylight exists.-Lighted switch for visibility in darkened rooms.-Manual- or automatic-on operation.-Adjustable light level setting of 10 to 150 fc (100 to 1500 lux).-Coverage: 180 degrees, max. 600 ft.2 (56m2).-cULus listed.-California Title 24 compliant. Color/Finish: -White color. Specifications: -600 Watts. Dimensions: -Overall dimensions: 2.63'' H x 1.69'' W x 1.88'' D. Warranty: -Manufacturer provides lifetime warranty.
Ceiling Mount Motion Sensor (mFi-MSC) is a dual-technology motion sensor, using both passive infrared and microwave motion sensors to minimize the likelihood of false detections.It is wall-mountable and designed for security, occupancy detection, resource scheduling, and other smart building applications. For use with mFi mPort hardware and mFi Controller software (included with the mFi mPort).
The DX-40 is the result of Optex's advance research with PIR and Microwave technology. Unique advancements include "Microwave Area Shaping Technology" and Spherical Lens PIR technology with Quad Zone Logic. These features combine in a sensor that provides reliable coverage of a large area. This sensor offers easy, trouble-free installation in a compact and attractive housing. The DX-40 has features necessary to accommodate virtually any installation. For a sensor with enhanced capabilities please see the Optex DX-40Plus.