Motion Detectors - Page 45

Manufacturer: Visonic Brand: Visonic Model: DUET-AM

Manufacturer: Centralite Brand: Centralite 3-Series

The 3-Series Motion Detector adds both security and advanced home automation features to your connected home. You can be notified when there's movement in a certain area and even trigger lighting scenes, HVAC settings, and security alarms based on the detection of motion. Automatically illuminate a dark hallway at night or turn on a nightlight when the kids wake up. Turn on living room and kitchen lights when your car pulls into the garage. The 3-Series Motion Sensor provides virtually limitless flexibility for interacting with your home! The Zigbee 3-Series Motion Sensor from Centralite is designed to be installed by anyone, not just professionals. Most users can pair and install the Motion Sensor in about 10 minutes. Compatibility The 3-Series Motion Sensor is compatible with most ZigBee HA 1.2 platforms (Some ZigBee HA 1.2 platforms and hubs require device-specific whitelisting. Refer to your platform/hub's compatiblity chart to ensure this device is compatible with your system.) The 3-Series Motion Sensor has been tested and works with the following platforms: - PEQ (equivalent to model 3305-P) - SmartThings - Time Warner IntelligentHome - Cox Homelife - Bright House Networks Home Security and Automation - Rogers Home Monitoring

Manufacturer: Rosslare Brand: ROSSLARE Model: AY-K12

Rosslare's AY-KR12B is a powerful RFID proximity card reader of 125 KHz cards and tags, featuring Wiegand 26-Bit output format and a read range of up to 80mm (3.15 inches). With a miniature, sleek design and a tough, UV and water-resistant casing, the AY-KR12B is equally suited to indoor and outdoor use, and is both economical and reliable. The AY-KR12B is certified for compliance with all leading International Safety and Access Control standards.

Manufacturer: Dakota Alert Brand: Dakota Alert

Works with any 2500 series receiver to send a signal 2,500 feet

Manufacturer: Leviton Brand: Leviton Model: OSFHU-C4W Color: White

Fixture-Mounted PIR High-Bay Sensor with 3 Interchangeable Lenses for Cold Storage, 480V, No Neutral, White

Manufacturer: TEQIN Brand: TEQIN

S-Pomeranian (Smart Pomeranian) My body is small and cute, but I am the most loyal partner to master. If host is away, I will alert whole day to watch surroundings and collect any sensitive information by my eyes, nose and ears. Features: .Full 720P HD video technology .Two-way audio intercom technology .3D Voice Echo cancellation and noise suppression technologies .Automatically device ID No. searching while internet access within LAN .Plug and Play technology .Alarm Push Technology .Network auto-adaptive technology .Silent packet dropping technology .Globally servers distributed and automatic shunted technology Specifications: Image Sensor:1.0MP HD CMOS Sensor Operation System: H.264 Baseline profile Resolution Variable: 720P(1280 x 720),VGA(640 x 360), QVGA(320 x 180),1.0MP Frame Rate: 1~30fps Mobile phone monitor: Support megapixel HD mobile phone monitor, dedicated iPhone software, Android software(Software version required IOS4.3,Android 2.3 and above) On-board storage: Support external 128GB TF card,24 hours recording,More than 32GB need to be formatted as FAT32 Installation takes only three steps: 1. Connecting power supply and network, 2. Installing mobile phone software; 3. Viewing CCTV images. Notice: -If the camera can not be connected with the APP, please poking the RESET button on the back of the camera until you hear "Bing". -For ios or Android phone(APP Store or Google Play): The original APP(Highly recommend): COT Pro ; 2 replacements: 2CU and YOOSEE. -For Tablets: YOOSEE

Manufacturer: Sensor Switch Brand: Sensor Switch Model: MSX12 M4 Color: White

The 360 degree fixture mounted motion sensor from Lithonia lighting is designed to save energy and money by automatically turning lights on when you need them and off when you don't. Perfect for operating single or multiple fixtures in commercial and residential locations. It is easy to install and wire to led or fluorescent bay lights, strip lights and wraparound light fixtures.

Manufacturer: iSmartAlarm Brand: Motion Sensor Model: PIR3 Color: White

Monitor for movement anywhere within 30 feet with the Motion Sensor - battery-powered, with no drilling required! re-positionable throughout the house, you can add multiple motion sensors for complete coverage. Pet-sensitive. Receive immediate notifications on your smart phone in case of intrusion and identify threats or false alarms instantly. (Ismartalarm system required).

Manufacturer: CMVision Brand: CMVision Model: CM-IR56

Only sensitive with Sony or Sharp CCD Camera and lots of IP CMOS camera might not work with 850nm wavelength. Please be careful to read your camera specification first before buy! Increase the night vision for your color day/night surveillance cameras. This long range, 56 high power LED, indoor/outdoor, IR illuminator lights up the night for your monochrome (B&W) CCD or color day/night cameras with an effective IR range of 100 feet (30 meters) and wide IR projecting angle. Low operating costs, automatic CDS power control auto-powers unit only in low light situations for 24-hour detecting and monitoring. This high quality IR-Illuminator has a weatherproof, IP66, housing for both indoor or outdoor use. To make sure infrared lights fully functional, special cctv cameras featured with low illumination, infrared ray sensitivity are required. Without this kind of special cameras, these infrared lights will not work well.

Manufacturer: BOSCH SECURITY SYSTEMS, INC Brand: Bosch Model: ISW-ZPR1-WP13

The Bosch Security Systems PIR Motion Sensor with ZigBee HA 1.2 support provides top of the line detection with 79 zones with in 8 layers of sensing area and connects to your Samsung SmartThings Hub with device handler (Instructions included). With exclusive technologies such as Pet Immunity and First Step Zone Processing false alarms are eliminated. Easy installation and flexible mounting options make the sensor user friendly. *This device may work with many systems but we have only tested it with Samsung SmartThings. Please take this into account when placing your order. To connect this device to your SmartThings hub you must create a device handler for it in the SmartThings developer API (instructions included). These instructions are very easy to follow and once set up you are free to connect as many Motion Sensors as you like.