Motion Detectors - Page 5

Manufacturer: Altronix Brand: Altronix Model: SMP3

Single Output Power Supply/Charger for converting low voltage AC input, to a 6VDC, 12VDC or 24VDC @ 2.5 amp of continuous supply current output

Manufacturer: Sensor Switch Brand: Sensor Switch Model: CMRB 6

Designed for mounting heights of up to 45 ft., the CMRB 6 High Bay 360º sensor provides Passive Infrared (PIR) occupancy detection over a 15-20 ft. radial coverage pattern that overlaps the areas lit by a typical high bay fixture. This line voltage sensor switches loads directly without the need for a power pack.

Manufacturer: Enerlites Brand: Enerlites Model: MPC-52V

Commercial grade 360 degree passive infrared ceiling mount occupancy sensor with motion detection. Automatically turn lights ON/OFF when motion is detected. Save money installing Enerlites MPC-52V as installation time is cut from 45 minutes, down to 10 minutes. No ceiling box is needed for this product. Includes two free lenses including one for closer range that is more sensitive to motion, and one for longer range with less sensitivity. To install the MPC-52V, simply poke a hole in the ceiling with your screwdriver, insert the back plate into the hole, feed the wires through, and connect. It is ideal for business use for the purpose of energy efficiency, security, and surveillance. Customization: • Adjustable Time Delay: 15 sec. - 30 min. • Sensitivity Adjustment: 50% / 100% Specifications: • Multi-level, 360° Fresnel lens for superior occupancy detection • Coverage: 360° field of view; 800sq.ft of coverage • Operating Temperature: 32° to 131°F (0° to 55°C) • Incandescent 800W @ 120VAC, 60HZ • Fluorescent 800VA 277VAC, 60HZ • Motor: 1/4HP, 120VAC,60HZ • Wire Designation: Hot, Neutral, Load • Passive infrared technology (PIR) • Controls incandescent, CFL, and LED lighting. • UL Listed

Manufacturer: HEATHCO LLC Brand: Heath/Zenith Model: HZ-5318-WH

14"W x 8"D x 12.5"H, white, motion activated, security flood light with dualbrite, a patented heath Zenith technology the provides energy saving 2 level lighting operating at half power until motion is detected & full power lighting when motion is detected, light automatically switches to full bright security lighting for pre-selected time, 1, 5, or 10 minutes, light will then automatically return to accent mode, 50% power, accent lighting begins at dusk & can be pre-selected to stay on for 3 hours, 6 hours, or until Dawn, up to 100' detection range, uses two 120W maximum Par38 halogen flood bulbs, not included, selectable light timer, test, 1 minute, 5 minute, or 20 minute, adjustable detection sensitivity, energy star, 240 degrees, 10 year warranty.

Manufacturer: OPTEX Brand: Optex Model: MX-40PI

Pet-immune PIR/Microwave motion detector eliminates false alarms. The 40 X 40 PIR/Microwave w/Pet Immunity motion detector offers a multitude of features that prevent it from delivering false alarms. Quad Zone Logic provides pet immunity to eliminate false alarms from objects 16 inches tall or less, while microwave technology allows free range of movement to pets up to 100 pounds. The 40 X 40 PIR/Microwave w/Pet Immunity motion detector's high-quality spherical lens and dense detection pattern give the motion detector pet immunity superior to single-technology sensors. This motion sensor detects IR energy changes in multiple areas and then couples them for extremely accurate detections. Quad Zone Logic provides multi-segmented detection zones over the detection area. It is designed so that a human-size target will normally fill 4 to 8 zones, and this will cause an alarm to be generated. Any smaller temperature change (i.e.: small- to medium-size pets, rodents or moving curtains) only activates one or two zones at the same time, creating a much weaker detection signal. Using a noise reduction current, the 40 X 40 PIR/Microwave w/Pet Immunity motion detector provides high-reliability performance against outside noise, such as electromagnetic interference and especially noise from fluorescent lights, thus solving a problem common to microwave motion sensors. Its Anti-Crosstalk System prevents interference from other microwaves if you have more than one detector in the area. Additional features include a sealed housing, which prevents drafts and insects from reaching the pyro element of the motion detector.

Manufacturer: SIMPLEHOME 10947218335 Brand: SIMPLE HOME Model: XHS7-1001-WHT Color: White

Be alerted when movement is detected. Easily turn off any appliance that has been left powered on when no motion is detected. Trigger Simple Home Products to turn on when motion is detected. Remotely monitor movement inside your home Uses passive infrared sensors (PIR) to detect motion up to 15 feet away Alerts you when motion is detected with push notifications Can trigger other Simple Home products to turn on when motion is detected Save money and conserve energy by having devices turn on only when motion is detected Small unobtrusive design blends in seamlessly into any environment No hub required, works off your existing Wi-Fi network

Manufacturer: Lumtopia--DROPSHIP Brand: Acclaim Model: C689BK Color: Matte Black

Whether you are building a new home, remodeling, or doing a light commercial project, we invite you to consider our products for your exterior lighting requirements. Our wide selection of affordable, yet fashionable outdoor lanterns include a variety of styles, from traditional to contemporary, to complement your architectural preferences.

Manufacturer: WATTSTOPPER Brand: Watt Stopper Model: BZ-50

The inteliswitch as-100 automatic control switch operates as both a manual and automatic control device. Manually, it allows users to control loads on/off. Automatically, it receives signals to turn lighting on or off from lighting control panels or other lighting control systems.

Manufacturer: ROULE Brand: ROULE

Sensor Power Supply: DC 4.5V (4.5V/AA/LR6*3) Working Current: < 0.5mA Standby Current: < 400mA Voltage of Low Voltage Indicator:: 100dB Wireless Transmission Frequency: 433.92MHz ± 250KHz Infrared Sensing Distance: 20 ft (6m) Infrared Sensing Angle: >100 Degree Arming Mode: Arming delays 30s each time Alarm Mode: Alarm once triggered Alarm Time: 30s each time Wireless Distance: 100 feet Remote Control: Power Supply: CR2032, 3.0V Standby Current: < 2uA Working Current: < 12mA Infrared Sensing Distance: > 100 feet Wireless Transmission Frequency: 433.92MHz ± 250KHz Package Contents: ★ 1 x Sensor Unit ★ 2 x Remote Control Unit ★ 1 x Set of Mounting Hardware

Manufacturer: High Infinity Germany Brand: HiKam

We follow this K.I.S.S principle-Keep It Simple and Smart-to design our products. By cooperating this PIR sensor, the HiKam A7 functions as a home orientated or SMB orientated alarm center.By installing this PIR sensor in the expected place, you can greatly extend your protect areas and decrease the number of false alarms caused by the camera's motion detection.Upon the detection of a human intruder the PIR sensor sends alert signals over the 433MHz frequency radio, which triggers the paired HiKam A7 to alert you through emails (with pictures) and/or push notifications. Specification Operating voltage: 3V (1.5V AA*2, included)Operating temperature: -20° - +50°Radio frequency: 433MHz Detecting distance: 36feetDetecting angle: 110° LED: 3 seconds on for alarmSize: 4.7x2.5x1.8 (inch)Recommend to Indoor use, or avoid water. Installation suggestionTo maximize the coverage range:- Position the PIR sensor about 6-8 feet off the ground.To eliminate the possibility of false alarms:- Make sure the PID is securely mounted. - Avoid incident light from the Sun.- Put the PIR away from heat or cooling source.- Avoid directly facing to metal.For your camera to take solid pictures or videos when alarm is triggered:- Make sure the PIR's coverage area and the camera's have overlap.We provide U.S local engineer support. For any questions feel free to contact us.