Horns & Sirens - Page 31

Manufacturer: ATW Brand: ATW Model: Pointer

INDOOR OUTDOOR SIREN STROBE LIGHT COMBO105db Loud You are bidding on One Single tone piezo siren - warble Strobe flashes at same rate as siren sounding Mounts onto single gang box or can be surface mounted with two screws CE Approved Specifications Operating voltage: 6 - 14 VDC Sound output: 105 dB @ 12 VDC Current draw: 180 mA @ 12 VDC Dimensions: 2.9" x 4.8" x 1.7" Color: Ivory body with red strobe Material: UV-resistant, high impact polycarbonate plastic Wiring: Red-positive, Black-common COLOR RED

Manufacturer: Revere Industries Brand: Revere Industries Model: RVL18SRN

The RVL-18SRN 2 channel siren speaker with pulsing fire horn is an 18 Watt audible signal appliance ideally suited for alarm signaling.

Manufacturer: Idol Memory Brand: Idol Memory Model: KIWII125B

KIWII is portable protection device suitable for campus safety, night workers, hospitals nurses, elder individuals, etc. Key chain design and easy to carry. Can be attached to key chains, purses, backpack or carry in the pocket. Simply pull the pin to sound a 125 dB siren that alerts attention and warns off suspicious characters. Lower power consumption. Single AA alkaline battery required.

Manufacturer: Neewer Brand: Neewer Model: 88015259

Description Easy to mount with screws It's so easy to install on any 12 volt system vehicle: Car's, Truck's, Golf Cart, Go Cart, RV's, and Boats. Dimensions: 10.8x10.8x10.5£¨cm£© Package Contents: 1x SIREN HORN

Manufacturer: ATW Security Brand: MASCON Model: TV-4WX

ATW Security TV-4WX ATW ADJ CAM MNT ARM WHITE

Brand: Securityman

The SM-103 is an add-on wireless outdoor siren for SecurityMan Air-Alarm system. It features a receiving distance of up to 300 ft in open areas, a siren sound of 120 dB and an operating power of 100V-240V AC. It has a run time of up to 100 hours and includes a built-in 6V DC rechargeable backup battery.

Manufacturer: AMSECO POTTER Brand: Potter Electric Model: SSX-82SB

Potter Electric SSX-82SB 25W 2-TONE SRN W BLUE STRB

Manufacturer: Shenzhen Eray Electronic Brand: Eray Model: LB-W03X-38

Usage Connect it with DC12 power adapter and power on, then turn on switch of the back-up battery. Power-up for the first time, it will release a long "beep" and alarm light will be bright for 3 seconds, indicating light bright for one second, from which we can tell siren is in standby mode. Delete: A Long press on coding button for 5 seconds, siren releases a long "beep" and then two short beeps, indicating a successful deletion. all wireless devices coded is deleted. Operation: Arm: Press [arm] key on remote control, siren will release a long beep and alarm lights flash for one second, indicating arming successfully. Indicator light will keep bright, entering arming status. Disarm: Press [disarm] key on the remote control, two short beeps come and alarms light flash twice. Disarm successfully. Indicating lights will bright for one second, entering disarm status entered. Technical specification: Input voltage: DC9-15V Build-in battery: N IH I AAA*6DC 7.2V Standby current:< 25mA Alarm current:< 250mA Received frequency: 315/433 /866M H z Received distance:100m (open area) Sound loud:120dB Sound time: 3minutes Working temperature:-20¡æ ~ +55¡æ

Manufacturer: Teledynamics Brand: Valcom Model: 1126-VC-V-1074 Color: Brown

Surface mount doorplate speaker. Talkback. Weather resistant. Includes "CALL" button (includes Braille). Dimensions: 5.5"H x 4"W x 1.1"D. Gray plastic housing. VALCOM POWER UNITS (0). VCV1074.

Manufacturer: WattStopper Brand: Watt Stopper

About The Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor Almond 600 Watts The Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor helps to prevent lights being left on in unoccupied rooms including rooms that have multiple switch locations. The Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor is designed in compliance with California#39;s 242008 residential code. The Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor uses a push button that to turn the lights on. The Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor uses 40kHz high frequency ultrasound to detect motion within the area, and does not need a clear line of sight to work properly. The lighting in the room will remain on as long as motion is present, and if the lights are left on and the room becomes vacant the lighting will be turned off. The Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor can also turn your lights off manually by just pressing the push button located on the sensor. The Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor offer true multiway on and off control when connected to one or more CU250s or RH253 Decorator Single Pole Momentary Switches. Any of the devices connected to your lighting application can be used to turn your lights on and off. If the room becomes vacant and the lights are left on the Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor will automatically turn the lights off once the time delay of the last CU250 to sense motion has expired. The Watt Stopper CU250A 120V Ultrasonic Multiway Wall Switch Vacancy Sensor are perfect for storage rooms, Lshaped rooms, bathrooms and any other rooms within the home where the line of sight is not unobstructed.