Kramer PT-572Plus HDMI Over Twisted Pair Receiver-by-Kramer

3D Pass-Through. DGKat Signal Integration - Kramer¡¯s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat cables designed specifically for optimum performance. System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BCDGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BCDGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BCDGKat7a23 cable. Cable - Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use, use Kramer's BCDGKat524, BCDGKat623 and BCDGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using nonKramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground. EDID PassThru - Passes EDID signals between the source and display. Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached. Power Connect System - A single connection to the transmitter or the receiver powers the system when the devices are within 270ft (90m) of each other. Ultra-Compact Pico TOOLS - 4 units can be rack mounted sidebyside in a 1U rack space with the optional RK4PT rack adapter. Specifications: INPUTS: 1 RJ-45 connector. OUTPUTS: 1 HDMI connector. BANDWIDTH: 4.95Gbps (1.65Gbps per graphic channel). COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP. POWER CONSUMPTION: 12V DC, 250mA. DIMENSIONS: 6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H. ACCESSORIES: Power supply. OPTIONS: RK-4PT 19¡± rack adapter.