The ioProx proximity keytag is resistant to cracking and breaking and is small enough to fit on a keychain Dual encoded keytag: - Kantech eXtended Secure Format (XSF) - 26-bit Wiegand format (W26) 50 Pack
Viking Paging System with Amplifier and Speaker Horn Fully Powered for Use with Office Phones
Manufacturer: Viking Components
Add Paging and Multiple Line Loud Ringing to Any Phone System. Provides loud ringing and paging to elec-tronic key systems, 1A2 Key systems, PABXs as well as No-KSU phones and multiline phones. Paging is accomplished by connecting to a paging port or unused telephone line input (trunk port) of nearly any phone system. It will also generate adjustable loud ringing from up to 6 analog lines or from a dry contact clo-sure. Either a loud electronic warble, or one of three other soft chime sounds may be selected. An external night transfer switch can be added to turn loud ringing on or off in night bell applications. It is easy to install and eliminates the installation of multiple bells, relays and paging cards. The unit comes complete with a power supply, amplifier, and weather resistant high quality paging horn. Specifications: Night bell Loud ringing Two watts of paging power All lines are optically coupled for use with fax switches and analog PABX/KSU stations Can provide background music from an external source Paging from an unused trunk port or paging port Four loud ringing sounds: Electronic warble - Double gong - Quadruple chime - Door chime (ding-dong) Provides loud ringing or night bell, from 1-6 lines for warehouses, yards, etc. Output for controlling a 12 volt relay from 1-6 ringing lines Page alert tone 600 ohm output for sourcing high powered amplifiers Power: 120V AC/13.8V AC 1.25A, UL listed adapter provided Dimensions: 133mm x 89mm x 44mm (5.25 x 3.5 x 1.75) Paging Output: 2 watts - powers up to (3) 8 ohm or (16) 45 ohm speakers Sound Pressure: 110 dB 1 meter (warble) Speakers: (3) 8 ohm paging horn included, (3) maximum Maximum Speaker Run: 91m (300 ft) maximum 18 AWG Talk Battery: 24V DC Connections: (2) RJ25 jacks, (1) 10 position screw terminal block
Linear MDKP Wireless Outdoor Keypad The Linear MDKP Exterior Wireless Keypad can transmit a unique signal for each 1-6 digit PIN code entered. It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions. Access codes are programmed into the access controller or receiver, the maximum number of codes possible depends on the receiver model used. To operate the Linear MDKP, a user simply enters a PIN followed by the # key, and the code is transmitted to the receiver for validation. Downlighting can be turned on by pressing the # key twice; it remains on for 30 seconds or until a code is sent. The MDKP can be mounted on either a wall or a gooseneck. FEATURES: Factory programmed MegaCode format Internal antenna 1-6 digit PIN for each user Long life lithium battery Rugged cast aluminum housing Built-in downlight RF frequency: 318 MHz 4" W x 7" H x 3" D Linear MDKP Compatibility Linear GNB-1: Burial Mount GooseneckLinear GNC-1: Curb Mount Gooseneck Linear AKR-1: Exterior Digital Keypad with Radio Receiver Linear AM-RPR: Remote Proximity Receiver Linear AM-RRR: Remote Radio Receiver< Linear MDR: 1-Channel Receiver Linear MDR-2: 2-Channel Receiver Linear MDRG: 1-Channel Gate Receiver Linear MDRM: 1-Channel Built-in Receiver Linear SMDRG: 1-Channel Gate ReceiverLinear WOR: Wiegand Output Receiver
ON-Q Lyriq - Keypads In Studio Design Lyriq Studio High Performance Keypad White (AU5010-WH)
Manufacturer: Tjernlund Products, Inc.
The OnQ legrand AU5010-WH lyriQ High Performance Keypad is perfect for applications requiring superior power and fidelity. The keypad features enhanced performance with 20W per channel (class D) power and active subwoofer support with an 80 Hz low pass filter. The keypad includes backlit buttons to indicate unit status, and an RJ45 connection for easy, Cat 5 based installation. Includes studio wall plate.