Attention: Links to Install Videos provided in package, 100% USA Lifetime tech support, Quick-guides made by USA techs, 60-day return policy with no questions asked. 3 Year Warranty. All these kits are standalone and does not have any software that will allow you to view who came in or out. Before installing this kit, check with your local fire Authority for the compliance of fire codes. This system does not need to connect to a computer it works 100% standalone. All the programming is done through the Reader / Keypad.
Never be bored again with an adorable little arcade cabinet you can fit in your bag! This Raspberry Pi-powered kit combines our sharp PiTFT 2.8" display, mini thumbstick, and mini arcade push buttons and a whole bunch of components to create the most adorable arcade cabinet in the known universe. It comes as a big kit with lots of parts including all electronic components, the laser cut case, power adapter, and a blank SD card (you'll need to burn the CupCade image on). You provide a Raspberry Pi model B, a soldering iron, solder, wire, basic electronic hand tools, tape, etc. New, as of June 6, 2014 - We now have a 'release candidate' kit which is easier to build than the Beta kit, with a snazzy custom controller PCB! This kit has a lot of steps, so its best for people who have soldered before and even better, have a little Raspberry Pi/Linux hacking under their belt in case some configuration-file-editing is required. Give yourself a nice, long Saturday afternoon to put it together (about 4-6 hours altogether). We played a bunch of memorable old arcade games, like Ms Pacman, Galaga, Donkey Kong, Arkanoid, DigDug, Gauntlet, etc. with squee success, but some games that are more advanced might be too slow even with overclocking the Pi. There are four buttons total, two next to the joystick for "fire" and "jump" and two in front for "coin" and "start". If you set up your Cupcade for 'horizontal' alignment, you can even run classic Famicom/Nintendo games at full speed. Tons of arcade games that may not emulate well are available in NES format, or just play some old familiar classics. Many details stand out here that show the love and care PaintYourDragon put into this kit. First: you can configure it for either vertical (Ms Pac-man! Donkey Kong! Arkanoid!) or horizontal screen (Joust! Qix! Nintendo!). The controls can be set to either
OnQ / Legrand AU7394IV lyriQ MultiRoom Audio System Keypad, Ivory
Manufacturer: On Q
When installed with the lyirQ audio system, the keypad delivers high quality sound throughout the home and garden. It features inhanced performance with an effecient 15 watt, class D amplifier, as well as convenient back lit buttons to indicate unit status. The keypad features an RJ45 connection for easy cat5 based installation.
- Viking Secure Touch Tone Relay Controller- Secure control of high security building entry systems- Door strikes and gates in conjunction with door boxes (W-1000 etc.) entry phones (E-10A E-20B E-30 E-40 E-50 K-1700-3 etc.) or hot-line/panel phones (K-1500-7 K-1900-7 etc)- User touch tone programmable- Non-volatile memory - retains programming during power outage- 6 digit programmable security code (to access programming)- Switchable 32V talk battery- Programmable relay activation time- Programmable relay activation code (1-2 digits or **)- Operates on any 12-24V AC/DC power source- LEDâ€™s for power / relay activation- Programmable allow / restrict for dialing from entry phone- Programmable allow / restrict for keyless entry from entry phone- 32 keyless entry codes- Trigger input for contact closure from postal lock request to exit etc.VKSRC1
GEM-P3200 NAPCO 8/32 Zone Control Panel â€¢8 End-of-line-resistor burglary zones programmable for area, exit/entry delay, interior, follower, day zone, chime, fire options, sensor watch, swinger shutdown, zone anding and a variety of other features â€¢Up to 48 points of up to 32 zones with optional zone-expansion modules 4- zone keypad EZMs (built-in) â€¢Including up to 2 2-wire fire zones â€¢Up to 32 individually coded users, each with a programmable authority level â€¢3 on-board relay outputs, expandable 24 external relay outputs â€¢3 keypad panics: fire, police & auxiliary â€¢2 independent area partitions â€¢Up to 7 separate access stations by up to 32 users
IP Auto Alarm Dialer: Calls your Cell Phone using your Router
Manufacturer: Alarm Lab
Brand: Alarm Lab
â€¢ Connect to any Ethernet port that has internet access.
â€¢ Connects to your alarm panels siren output (9VDC - 18VDC).
â€¢ No further configuration required!
â€¢ IP Dialing & SMS Texting is free, notify Landlines or Mobile Phones! (250 Free Dial / SMS Text Credits per year)
â€¢ Send site codes, property owner contact and local police contact information.
â€¢ No delay between phone calls.
â€¢ Calls up to 10 numbers at the same time!
â€¢ Plug and Play with an Ethernet cable with a live internet connection!
IPAutoDialer is powered and triggered by your alarm panels Siren Output. IP Auto Dialer works with any alarm panel that uses 9-18VDC Siren Output (Honeywell Vista, ADT, DSC, Etc.)
â€¢ Input Voltage: 9-18VDC (Connects to Siren Output)
â€¢ Boot Time: 500ms
â€¢ Ethernet: 10/100 RJ-45
â€¢ Power Consumption: 250mA at 12vdc
â€¢ Memory Card: MicroSD (Included w/Programming Software)
Frequently Asked Questions (FAQ's):
Q: How do I connect the IPAutoDialer to my alarm panel?
A: Most Alarm panels have a 12VDC output for controlling the siren. Use the included cable to connect your IPAutoDialer to the appropriate terminals.
Q: How do I connect IPAutoDialer to the internet?
A: IPAutoDialer will automatically configure an IP address via DHCP. If you can plug your laptop into the same cable as IPAutoDialer and get an internet connection, IPAutoDialer is ready to work!
Q: What if my internet goes down?
A: IP Auto Dialer will not be able to send any notifications without a live internet connection.
Q: Is there a monthly fee?
A: No Monthly Fees!
Q: Is Calling Cell Phones, Land-Lines or Sending Text Messages Free?
A: You get 250 Voice Dial / SMS Alarm credits per year