Electop 5 Inch HD CCTV Tester AHD TVI CVI Coaxial HD Video Monitor Tester Analog Video Test UTP Cable Test VGA/HDMI Input DC12V Output Camera Tester

Product Funtions:
-Video signal testing
Vedio monitor tester, High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.

Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section

- Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

-Enhanced network cable testing
By UTP CABLE TEST port on the meter, you can test the connection of network cable.

- VGA/HDMI input
Support VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution is 1920X1080

- TVI camera test
HD TVI video surveillance testing, support 720p 25, 30, 50,60fps/1080p 25,30fps. When TVI signal input, the tester will display HD TVI camera image.

- AHD camera test
HD video surveillance testing, support AHD 2.0 version, 720p 25,30fps/ 1080p 25,30fps. When AHD signal input, the tester will display the AHD camera image.

- LED lamp
It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.

-The battery graphic display
The tester has advanced power control and protection circuit,low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours.

-PTZ controller -DC12V 1A output power -Image generator etc.

Package Inclueds:
1 x HD coaxial tester
1 x Adapter DC5V 1.5A（with USB cable
2 x International Standard 18650 2600ma battery
1 x BNC cable
1 x RS485 connector
1 x Power output conversion cable
1 x Audio cable
1 x Lanyard
1 x Tool bag
1 x Instruction Manual