ISWEES LED Security PIR Infrared Motion RF Sensor Detector For Outdoor Wall Light Lamp (Black)

1. Easy to install.
2. Automatic, convenient, safe and practical.
3. It has the function of power and detection indication.
4. The motion sensor can identify day and night automatically.
5. It has wide detection range made up of up and down, left and right service field.
6. This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT.
7. It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once.

Specifications:

Material: ABS
Working Rotation: 140°
Voltage: AC90V~240V(50Hz)
Standard: LVD, EMC, CE, RoHS
IP Rating: Indoor application IP44
LUX Setting: 2-2000lux svr adjustable
Size: Approx.5.0 (H) x 6.0(W) x 16(L)cm
Induction lighting time: 5s~6min adjustable time
Detection distance: Approx 12M, installation 1.5-2.5M High

Connection:

★Brown is hot (connect to incoming black).
★Blue is neutral, connect to incoming white.
★Red is outgoing/switched hot, connect to hot wire of whatever you are driving (light fixture etc.)
★It will not attach properly to a 1/2" electrical box knock-out.
Output: Maximum 1000W incandescent lamp, 100W fluorescent lamp ,
Exhaust fan 100W, Motor 100W, Electric bell 100W

NOTE:
★The item can be less sensitive if you go forward the detector, but it can be sensitive if you go down the cross section.
★If the person stop moving under the motion sensor, it can't light on also.
★When it is very hot in summer, then temperature of environment is nearly the same as people, it may not detect well.