Logisaf 3.5" LCD Ip Camera Cctv Tester POE Test Monitor 4g Sd Card Multifunction

Features:

3.5inch 480x320 touch screen,easy to operate.
Onvif IP camera video testing.
Compatiable with H.264/MPEG4/MJPEG IP cameras, such as Dahua, Hikvision, and ACTI.
Built in WiFi: receives video from wireless camears or ONVIF cameras connected to the network.
Analog camera video display.Auto adapts and displays the video in NTSC/PAL formats
Support more than 30 protocols, such as PELCO-P,PELCO-D, SAMSUNG etc.
Video image digital zoom to view the image in greater detail.
Snapshot function allows you to save the current image as a JPG file in the SD card.
Video recording and playback
LED flashlight
4GB micro SD card included
Enhanced color bar generator:PAL/NTSC multi-system color bar video generator
Ping test:PING is the most conventional network debugging tool, it is used for testing if the connected IP camera or other network equipment's Ethernet port is working normally and the IP address is correct.
In digital IP surveillance applications, if the ip camera's ip address is not known, the device cannot be used. An ip addrss scan can quickly search for the connected ip camera or other network device's ip address.
The POE voltage test can test for POE voltage when a POE switcch is supplying POE power to an IP camera.
Cable test: test LAN cable sequence of wires
Support RS485, Rate 600-115200bps adjustable.
PTZ prtocol analysis, control command displays to check rs485 transmission whether is normal, easy to find the fault device.
PTZ control, pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and the preset position.
DC 12V 1A output power for cameras.
Audio input test
3.7V 3000mAh, Lithium Ion Polymer Battery can last 10 hours for normal use after charging for 4-5 hours.