UHPPOTE 125KHz RFID EM ID Card Metal Stand-alone Access Control Keypad

Introduction:
The BC-2000 uses the latest microprocessor technology to operate door strikes and security systems that require a momentary (timed) or latching dry contact closure.
All programming is done through the keypad. Codes and operating parameters are stored within the microprocessor and can not be lost due to power failure.
The BC-2000 can store 1000 prox cards and user 4 digit password codes. Each 4 digit password code has 10,000 possible combinations. The unit has one relay output with 5 Amp changeover contacts.

Features:
Model: Sebury BC-2000
Metal shell, anti-explosion; Non-Waterproof
Support 125KHz EM card (Can't support HID, Cobra, APCiK etc)
Low power consumption (Standby input current: <20mA)
3 access modes: Card, Card or PIN, Card with PIN
Relay output load can be 3A max
Antistatic interference: 12KV
Operating temperature: 0C~60C (32F~140F)
Note: Non-waterproof. Not support Wiegand 26 output,so can't connection as an external reader

Specification:
Intput Voltage:12VDC
Door relay: 5Am 12VDC
Tamper protection: Negative loop, normally closed
Codes: 1 Master,1000 cards and 1000 codes
Alarm output load: 150mA pull current
Keypad: 12 keys, 3 LED status indicators
Standby Input Current: Less than 20mA
Card Type: RFID compatible card
Frequency: 125Khz
Read range: 50-80mm
Wiring connections: Electric lock / remote request to exit / door open detection / external alarm
Memory: Non volatile eeprom memory
Keypad housing: Metal
Dimension: 128mm*82mm*28mm
Net weight: 500g

Package include:
1 x Metal Keypad
1 x English User Manual
1 x Flat head screw
4 x Wall fixing plugs
4 x Sell tapping screws