Woshida 3.5'' LCD CCTV Tester UPT Cable Tester POE Digital Multimeter Optical Power Meter TDR Tester HVT-2613T

Model:HVT-2613T
Signal mode:NTSC/PAL (Auto adapt)
Display:3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
Video IN/OUT:1 channel BNC Input & 1 channel Output
Video Output Mode:1.0 Vp-p
Level test:Video signals measured in IRE or mV
Communication:Support RS232 and RS485
Baud Rate:600,1200,2400,4800,9600,19200,57600,115200bps
Color bar generator:Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green,blue,white and black color )
UTP cable test:Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V power output:Output DC12V1A power for camera
Audio input test:test the pickup and other audio equipments on the front-end
Data Monitor:Captures and analyzes the command data from controlling device Image 10x zoom:10x zoom image display and video out
Photograph:snapshot and save the current image as JPG file
Video record:Video record and storage the file
Record playback:To view the storage file in the SD card
Port flicker:Find the connected POE port quickly.
IP scan:Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor:Check the IP address whether is occupied
PING testing:Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan:Search the cable by the audio signal
POE tester:Display the power supply voltage and cable connection states
TDR Tester:Only for T model
TDR Tester:breakpoint and short circuit measurement(BNC cable, telephone cable) Power Adapter:DC 5V(1.5A)
Battery:Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable:After charging 3-4 hour, working time lasts 11 hours