Security Sensors - Page 29

Manufacturer: WAC Lighting Brand: WAC Lighting Model: CT-6A-R2 Color: Black

Touch on/off and occupancy sensor Controller. Intelligent motion and touch switch control of luminaires based on occupancy, compatible with wide range of WAC Lighting low voltage LED lighting luminaires. Can be used with any WAC Lighting 12V or 24V electronic low voltage system, including button lights, invisiled tape light, line, and straight edge. Programmed with three functions, touch and sensor to activate both motion sensor and touch switch. Touch only touch switch, inactivate motion sensor. Sensor only motion sensor, inactivate touch switch. Built-in adjustable TIMER on motion sensor allows automatic shut off after the sensor covered area is vacated. Maximum time delay is 20 minutes (20Min), minimum is 10 seconds (10S). motion sensor supplied with 18ft wire and touch panel supplied with 8ft wire. May be cut to desired length. Lengthening of wire is not recommended as will decrease sensitivity. Two different mounting options (screw or double sided tape mounting) for all under cabinet application included. Choose appropriate mounting option for Rough, smooth and curved surfaces. • designed for indoor under cabinet application.. includes a touch panel, an occupancy sensor, and a Controller AC/dv Input at 12V (60W Max) or 24V (96W Max). motion sensor supplied with 18ft wire and touch panel supplied with 8ft wire. May be cut to desired length. Lengthening of wire is not recommended as will decrease sensitivity. Built-in adjustable TIMER on motion sensor allows automatic shut off after the sensor covered area is vacated. Maximum time delay is 20 minutes (20Min), minimum is 10 seconds (10S). two different mounting options (screw or double sided tape mounting) for all under cabinet application included. Choose appropriate mounting option for Rough, smooth and curved surfaces. Standards: class 2, UL & cul listed for damp locations.

Manufacturer: Polarity Products Color: light beige

The Buzz Bulb, which is shaped like a regular light bulb, screws into a light socket of your motion detector light system. However instead of giving off light, when triggered, it emits an audible alarm -- loud enough to frighten any prowler while alerting those inside your home. The Buzz Bulb works well protecting homes during the daytime when lights are inactive. Customers also like the noise benefit of the Buzz Bulb at night because it not only frightens prowlers -- but also scares unwelcome animals, such as deer or raccoons, away from gardens and trash cans. Whereas lights alone don't have this effect. Since most motion detectors accept 2 lights -- one socket can still be used for a light and the other for the Buzz Bulb. The Buzz Bulb is ideal for protecting garages, sheds, outside workshops, barns and gardens. It's also good for alerting you if children or pets approach swimming pools or other restricted areas. The alarm sounds until the area is clear and the detector automatically switches off. Set of two.

Manufacturer: Rodann Electronics Brand: Rodann Electronics Model: RX1000A

The RX1000A Wireless Entry Alarm Receiver is for expanding an existing RX&TX1000A Entry Alarm System and is not a stand-alone security solution. Rodann Electronics motion detectors incorporate state-of-the-art passive infrared (PIR) sensor technology. They are not affected by sunlight, car headlights, reflections, shadows, or colors. Included is one (1) receiver. Expand the coverage of your security system with additional transmitters, receivers, and accessories (all sold separately). This unit is not compatible with TX500 or TX1000 (non-A) model.

Manufacturer: Southwire Retail Sales Brand: Southwire Model: 56692144

Highlights : 22/2 gauge Color: Gray Length : 500 feet Rated to 221 degrees Maximum voltage rating of 300 For use in dry or damp locations Spool

Manufacturer: Dakota Alert Brand: Dakota Alert

Continuous, hands-free monitoring on the go with belt clip receiver

Manufacturer: Fibaro Brand: Fibaro Model: 857934005119 Color: White

The Door/window sensor is a battery powered reed sensor. It's operation under the z-wave standard guarantees compatibility with the Fibaro system. The sensor expands the capabilities of the system by monitoring the opening of doors, windows and garage doors. It is used in automatic light control, access control and property protection systems. Installation of the Door / Window Sensor in your home increases the safety and comfort of its inhabitants. It also eliminates the risk of high fees for heating or air conditioning. In addition, the module can be equipped with a temperature sensor, and use the built-in binary input

Manufacturer: iSmartAlarm Preferred Package Brand: iSmartAlarm Model: 858176004052

Wireless and portable, be notified instantly of intruders or movement in any area of the home, day or night.

Manufacturer: Ecolink 28617953415 Brand: Ecolink Intelligent Technology Model: DWZWAVE2-ECO-2 Color: White & Brown

From the leaders in Zwave technology, the Ecolink Door/Window Sensor allows you to improve the safety and security of your home and family easily and effectively. Built with premium components, including Rare Earth Magnets for better performance, these entry/window sensors provide instant and reliable performance as part of your security system. Dimensions: 3.35”L x .97”W x .93”H.

Manufacturer: NYCE Sensors Inc. Brand: NYCE Sensors Inc. Model: NCZ-3011 Color: White

NYCE's wireless Door/Window Sensor combines the features of a Door/Window Sensor and ZigBee (802.15.4) radio into a single tiny device. Packed with intelligent features, the Door/Window Sensor expands your network's possibilities - monitoring any type of door or window anywhere in the home - and all without any wires. For more information and product manuals visit: http://nycesensors.com/support/ For SmartThings User: This product has been certified by SmartThings. i.e. product driver is already integrated into their platform. THIS IS NOT THE CONTROL4 VERSION.

Manufacturer: Smart Caregiver Corporation Brand: Smart Caregiver Model: TL-5102MP Color: White

Instead of sounding an alarm, the motion sensor sends a wireless signal to a pager carried by the caregiver (clipped to a belt or inside a pocket). This allows the caregiver to be notified wherever they are without disturbing residents. When positioned along the bedside the fall monitor will alarm as the resident attempts to vacate the bed. (extendable bracket is sold separately). Wireless sensor operates on 3 AA batteries. Pager operates on 2 AA batteries. Batteries not included.