Video Transmission Systems - Page 34

Manufacturer: Overseasymall Brand: Omall Model: OM15121201

Description: 100% Omall Brand New! With working with passive transceiver and active transmitters allow signals transmission up to 200m and 400m respectively. The unparalleled interference rejection and low emissions of the UTP allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Video Balun Transceiver can simplify the wiring project and save wire use quantity. Save project wire expenses. Each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signal. Transmission Signal: 4 Channel Transmission Distance: HDCVI 720P:400m/ HDCVI 1080P:250m;HDTVI 720P/1080P:200m; AHD 720P:250m/AHD 1080P:200m Category Type: UTP CAT5/5E/6 Compatible Format: BNC-M Twisted-pair Video Connector:Push-terminal Video Transmission Compatible Format: HDCVI/HDTVI/AHD ;Anti-interference: >60db ESD: 1A Contact Discharge Electricity Level 3 Coaxial Cable Connector: 2KV(common-code).Per:IEC1000-4-5 UTP Cable Connector: 2KV(different-code),4KV(common-code).Per:IEC1000-4-5 BNC Male Impedance: 75ohms ; UTP Cable Impedance:100ohms Dimension(L*W*H): 112mm*52mm*25mm Shell Material: ABS & Metal ; Color: Silver ; Net Weight: 180g MTBF: >10000H Operating Temperature: -10°C~55°C; Storage Temperature: -20°C~70°C ; Humidity: 0~95%(non-condensing) Note: The transceiver is not waterproof set,so keeping transceiver away wet environment will be prefer. Cable Recommendation: Link cable is recommended to use high quality UTP cable.Poor quality cable or network connection or improper construction will cause unstable connection,video or sound disruptions,picture noise appears. Package Included : 1x 4-Ch Passive HD UTP Cable Transceiver

Manufacturer: MS Brand: MS Model: GB001

The GB001 is special designed Video Ground Loop Isolator which built in video BALUN function, a passive devices which reduce Ground Loop Interference and also eliminate ghost/double images with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials, Differences in ground potentials are typically caused by unbalanced power line loads.

Manufacturer: Overseasymall Brand: OdiySurveil Model: om15081901

Description: 100% Omall Brand New! With working with passive transceiver and active transmitters allow signals transmission up to 200m and 400m respectively. The unparalleled interference rejection and low emissions of the UTP allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Video Balun Transceiver can simplify the wiring project and save wire use quantity. Save project wire expenses. Each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signal. Transmission Signal: 4 Channel Transmission Distance: HDCVI 720P:400m/ HDCVI 1080P:250m;HDTVI 720P/1080P:200m; AHD 720P:250m/AHD 1080P:200m Category Type: UTP CAT5/5E/6 Compatible Format: BNC-M Twisted-pair Video Connector:Push-terminal Video Transmission Compatible Format: HDCVI/HDTVI/AHD ;Anti-interference: 60db ESD: 1A Contact Discharge Electricity Level 3 Coaxial Cable Connector: 2KV(common-code).Per:IEC1000-4-5 UTP Cable Connector: 2KV(different-code),4KV(common-code).Per:IEC1000-4-5 BNC Male Impedance: 75ohms ; UTP Cable Impedance:100ohms Dimension(L*W*H): 112mm*52mm*25mm Shell Material: ABS & Metal ; Color: Silver ; N.W.: 180g MTBF: >10000H Operating Temperature: -10°C~55°C; Storage Temperature: -20°C~70°C ; Humidity: 0~95%(non-condensing) Note: The transceiver is not waterproof set,so keeping transceiver away wet environment will be prefer. Cable Recommendation: Link cable is recommended to use high quality UTP cable.Poor quality cable or network connection or improper construction will cause unstable connection,video or sound disruptions,picture noise appears. Package Included : 1x 4 Channel Passive HD Transceiver

Manufacturer: SMAKN Brand: SMAKN

Frequency response: DC-10MHz CMRR (Common Mode Rejection Ratio): 70db Connectors: Male BNC and Rj45 Input Impedance: 75ohm Output Impedance: 100ohm UTP Connections: Single-point Transmission Distance: 300m(color), 600m(monochrome) Applicable to NTSC/PAL/SECAM/CCIR systems Package Contents: 1x 4 Channel Passive UTP Transceiver

Manufacturer: Overseasymalll Brand: OdiySurveil Model: 0M-2052

Description: With working with passive transceiver and active transmitters allow signals transmission up to 330m and 1500m respectively. The unparalleled interference rejection and low emissions of the UTP allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This 4 Channel Video Balun allows the use of a shared or existing cable plant. Video balun is to convert the video signal into the balanced signal applicable to be transmitted on common Cat-5 unshielded twisted pair wire with perfect transmission effect, which can be applied in the occasions such as video monitoring and video meeting and can transmit four channels of video image simultaneously on an 8-core Cat-5 twisted pair wire. Video Balun Transceiver can simplify the wiring project and save wire use quantity. 4 Channel UTP Balun adopt differential signal transmission with excellent anti-jamming ability. Save project wire expenses. each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signal. Full motion CCTV video at distances up to 330m when used with any passive UTP video transceiver. Up to 1500m with any active UTP video receiver. No power required. Built-in transient suppression protection. Applicable to NTSC, PAL, SECAM and CCIR systems Frequency response: DC - 8MHz CMRR (Common Mode Rejection Ratio): 60DB Impedance: BNC terminal: 75ohm, Connection terminal: 100ohm Working temperature: -10°C - 70°C Storage temperature: -30°C - 70°C Size: 10.3 x 5.7 x 2.8cm Weight: 184g Installation Suggestions:Suggest to use this product indoors.When installing the video balun in outdoor,please install it in a waterproof place. Package: 1 x OdiySurveil(TM) UTP 4 Channel Passive Video Transceiver

Manufacturer: Overseasymall Brand: Omall Model: OM15120105

Features: -1.Support resolution up to 1080p; -2.To work with passive receiver up to 500M at 720p,450M at 1080p; -3.Male BNC input ports can connect with DVR directly; -4.4-level Slide Switch adjustment; -5.Screwless Terminal block. Cable Recommendation: Link cable is recommended to use high quality CAT.5e,CAT.6,CAT.6a,CAT.7 UTP cable.Poor quality cable or network connection or improper construction will cause unstable connection,video or sound disruptions,picture noise appears. Technical Specifications Adaptive Voltage:DC12V(Adapter)+/-10%; Compatible with PAL,NTSC,SECAM, Stability: MTBF>30,000h; Transmission distance:720p up to 500M(MAX),1080p up to 450M(MAX); Video Input Connector: Screwless Terminal Block;Video Output Connector : BNC-M; With indicator:Red LED for Power Indicator,Green LED for Video Indicator; Dimension(L*W*H):64mm*42mm*22mm(BNC not included); Shell Material: ABS plastic , Shell color : Black, Net weight: 52g; OperatingTemperature:-20°C~70°C,Humidity:0~95%(Non-condensing),Storage Temperature:-40°C~150°C. Application Area: Security Video Systems, Video Switching Systems, Home Automation, Multi-media Education Systems, Access Control Systems, Information Diffusion Systems,etc. Note: Installation-please refer to the installation guide which is included in the product package. The device not a water-proof design,please does the related measures in humid environment. Package Include: 1x Omall AHD UTP ACTIVE RECEIVER

Manufacturer: VENTECH SECURITY Brand: VENTECH Model: VT-T220PVA

PACK OF 1 PAIRS OF VIDEO BALUN VT-T220PVA(2 UNITS) OVERVIEW • Power.Video and Audio (PVA) signals are routed via UTP and RJ45 • Use with Power Supply Hubs and Cable Integrators • Up to 3,000ft (1km) with a hub active receiver • Up to 1,500ft (460m) with a StubEQ hub • Supports up-the-coax type control signal up to 750ft (225m) • Exceptional interference rejection • Built-in transient protection The VENTECH Model VT-T220PVA Video Transceiver with Power an Audio is apassive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP)telephone wire. Baseband (composite) signals of any type are supported. The VENTECH Model VT-T220PVA video transceiver allows transmission of CCTV video,Audio and low voltage power over UTP cable. The VT-T220PVA incorporates the transceiver engine of VENTECH 's popular VT-T220PVA video transceiver with the added value of camera power connections Power,Audio and Video are routed via UTP and RJ45 connections. Used at the camera, the passive VT-T220PVA has a compact body, a male BNC for direct connection to the camera, and is compatible with CCTV product line. The unparalleled interference rejection and low emissions of the VT-T220PVA allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The VT-T220PVA carnes a limited life time warranty are UL and cUL listed and CE, WEEE and RoHS compliant.

Manufacturer: OdiySurveil Brand: OdiySurveil Model: 0M15081902

Features: Note: This kit need the external power adapter to power on the device. Passive PoE Injector and PoE Splitter Kit allows low cost of delivering power over the network cable for shorter distances. This kit allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, CAT6 or CAT7 Ethernet network cable. On shorter network lengths, The power source could feed the wireless access point, IP video surveillance camera,Ip phone etc. This Kit contains both very cost effective injector and splitter. The injector inserts the DC voltage at the source location into the 5.5mm x 2.1mm injector plug, Then the DC voltage run through the spare pairs of the 10BASE-T or 100BASE-T network cable to the Splitter side, And the splitter splits the DC voltage from the network cable into the 5.5mm x 2.1mm DC jack. Power feed Pins: 4/5(+), 7/8(-) More instructions: There are 2 different cables for each color(each color cable you can use respectively). One is used at the router end of the Ethernet cable along with the power supply for the device you want to power. The other one is used at the end of the Ethernet cable to extract the power and send it to the device to power. Power from POE is generally 24v, most standalone devices is 5v to 12v.This product is used with the 12 volt power supply for that camera(ideal for 12Vdc). It just adds the power to the Ethernet cable at one end then removes it at the camera end so you can plug it into the camera power connector. If you look at the image you will see one the round connectors on the one pigtail is a male and the other is a female. If you did not get a 12 volt power supply with the camera you will have to purchase one. It plugs in to a wall outlet and the round plug connects to the POE injector. Package Include: 2 x PoE injector cable(White and Black); 2 x PoE splitter cable(White and Black)

Manufacturer: Overseasymall Brand: OdiySurveil Model: 0M15033002

Description: 100% brand new ; Product Name : DC Power Supply Cable; This BNC male plug is great choice for you all.It can be used for different CCTV condition.For different BNC switching.. Weigh: 120g; Package Content: 10x CCTV Security Camera BNC Plug Connector Adapter

Manufacturer: GEM ELECTRONICS Brand: Gem Model: BLN-STPT2

Gem Electronics BLN-STPT2 2PK * CCTV Balun : BNC Pigtail - Scrw T